BREAST MODULE
Breast Cap Cutter
The Foodmate Breast Cap Cutter separates the breast cap from the back piece. The machine gives an optimal result with a minimum loss of breast meat and can be easily adjusted to various bird sizes.
The process is managed as the broilers are hanging from the shackle conveyor and are pulled over an arbor. The covers around the circular blades also work as guides for the legs, so that the broiler is positioned correctly for the cut.
The height of the machine can be adjusted to broiler sizes by rotating the spindle.
- Allows for a maximum of 6.000 birds per hour
- Requires minimal maintenance
- Easy to clean
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
– Length: 1055 mm
– Width: 754 mm
– Height: 949 mm
– Weight: approx. 151 kg
BREAST MODULE
Breast Processor
The Foodmate Breast Processor is designed to produce split breast or whole breast with or without back. The machine has unique design features that allows for accurate cuts and minimizes the chances of birds clogging the machine.
The Breast Processor runs birds breast first. An arbour and several guidings pick up the bird and guide them into the circular blade. The breasts are then cut and transported through the machine by the pick-up chains.
- Allows for a maximum of 6.000 birds per hour
- Requires minimal maintenance
- Easy to clean
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
– Length: 1435 mm
– Width: 1342 mm
– Height: 1747 mm
– Weight: approx. 320 kg
BREAST MODULE
Halving Machine
The Foodmate Halving Machine separates the front half from the chicken. The machine also can be used to cut off the remaining backbone piece after using the FM Breast Cap Cutter. It requires minimal maintenance and is easy to clean. The Halving Machine can be installed on current figurations or newly constructed Frame and Flex Lines.
Allows for a maximum of 6,000 birds per hour
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
– Length: 737 mm
– Width: 680 mm
– Height: 1128 mm
– Weight: approx. 95 kg
BREAST MODULE
Halving Machine 2
The Foodmate Halving Machine 2 removes the breastbone from a half bird and can be used on both the 8-Piece and the 9-Piece Food Service System. This halving machine has dual blades, offering a precise horizontal cut, delivering the desired cut-out.
The lengthwise half cut chicken (done by the precutter) will run into this module, breast side first, and will be guided on the side of the hips into the module.
The Halving Machine 2 is suitable for all Cut-up systems.
- Easy to clean
- Requires minimal maintenance
- Allows for a maximum of 6.000 birds per hour
Stainless steel frame and motor
Motor (IP66) power is 2 x 0,75 kW
Machine dimensions:
– Length: 721 mm
– Width: 670 mm
– Height: 1348 mm
– Weight: approx. 150 kg
BREAST MODULE
Cross Halving Machine
The Foodmate Cross Halving Machine addresses problems commonly found with single bladed front halving machines. Using two blades instead of one large blade gives a better straight cut across the hips and gives more control over the number of ribs that stay attached to the front half.
There is no need for a Pre-cutter with the Cross Halving Machine and it contains a simple construction with no belts and easy maintenance.
- Allows for consistent and straight cuts
- Cut can be adjusted to help increase leg quarter yield
- Does not cut into keel tip
- 3 – 4 rib count on front half
- Eliminates the need for a pre-cutting machine
- Allows for easy adjustment and easy maintenance due to the simple construction
- Integrates easily into existing frame or flex cut-up system
• Stainless steel frame and motor
• Motor (IP66) power is 2 x 0,75 kW
• Machine dimensions:
– Length: 882 mm
– Width: 694 mm
– Height: 882 mm
– Weight: approx. 235 kg
(incl. Bypass: 355 kg)
BREAST MODULE
Lengthwise Halving Machine
The Foodmate Lengthwise Halving Machine splits the bird into two equal length halves. The machine can be adjusted to several bird sizes. The Foodmate Lengthwise Halving Machine gives the highest accuracy to get two identical halves. It can be installed on current figurations or newly constructed Frame and Flex Lines.
Allows for a maximum of 6.000 birds per hour
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
– Length: 981 mm
– Width: 716 mm
– Height: 1101 mm
– Weight: approx. 148 kg
BREAST MODULE
Pipistrello Cutter
Foodmate’s Pipistrello Cutter is designed to produce the famous pipistrello part. The module has unique design features that allows for accurate cuts and minimizes the chances of birds clogging the module. The Pipistrello Cutter is suitable for all our Cut-up lines and can be by-passed.
Allows for a maximum of 6.000 birds per hour
Stainless steel frame and motor
Motor (IP66) power is 0,75 kW
Machine dimensions:
– Length: 1055 mm
– Width: 754 mm
– Height: 949 mm
– Weight: approx. 160 kg