MORE DETAILS

  • One-piece frame made of 5 mm laser-cut and folded sheet metal.

  • Adjustable 680 mm wide reel holder shaft.

  • The motor placed on the reel allows to start and stop unwinding without any difference between full and empty reel.

  • Unwinding unit made of AISI 304 stainless steel, equipped with a double sling bar for film return. Preset for printer installation.

  • Automatic stop of the machine when the film has run out or in case of failure in unwinding.

  • Pneumatic self-centring film driving belts with an asynchronous motor.

  • An encoder controls bag length even if a print pitch is present.

  • The vertical sealing unit is for bags with a maximum length of 300 mm.

  • A particular device avoids sealing vertically several times on the same point when the bag is short and also allows to make bags with a maximum length of 500 mm with double pitch.

  • The horizontal sealing unit is 325 mm wide.

  • The movement takes place pneumatically through a force multiplier system. The multiplier optimizes air consumption.

  • The sealers are constantly heated and controlled by specific instrumentation on the electrical panel.

  • Temperature can be adjusted and saved on the touch screen control panel of the machine.

  • The electrical panel is located on the right side of the machine in an airtight cabin, and it is equipped with Schneider-Telemecanique components.

  • The colour Touchscreen control panel on the right side of the packaging machine is equipped with PLC Twido (Schneider - Telemecanique).

  • The pneumatic system consists of a filter, pressure regulator, automatic condensate drain (all self-lubricating SMC components). Valves are assembled in a battery.

  • Transparent safety guards are made of shockproof, unbreakable polycarbonate and equipped with handles and bayonet safety microswitches.

  • It is possible to save up to 250 different sets of work programs.

  • Print centering photocell with supports integrated into the film unwinding unit. Centering parameters can be adjusted and saved on the touch screen control panel.

  • Accessories:   

    • Other functions you can select and adjust on the touch screen panel:

    • set and save printer parameters;

    • enter total or partial package counts;

    • select closed or open cycle for light or heavy products to reduce loading time and increase packaging cycle speed;

    • set the electronic adjust of jaws opening for small pipes to increase cycle speed;

    • get alarms in case of lack of film or product, incomplete towing and wrong film unwinding;

    • optimize air consumption.